The water pressure of the front filter is much smaller, especially when two taps are opened at the same time, it is the front If you install a filter device, the natural water pressure will change, and if the filter device is blocked for a long time, the pressure after filtration will be lower. This is normal. it is recommended that you clean the filter regularly, or side by side to install a pipeline to alleviate (increase the flow area). If the water pressure in your home is normal before installing the water filter, it is the problem of the water filter. It should be that the diameter of the water pipe of the water filter is too small to solve the problem. it is estimated that only a large pipe water filter is changed. The front filter basically does not affect the water pressure. you can check the water pressure of your whole building, or find the master of HVAC Qibing to see if it is clear! It's good to install a low-voltage switch. if the pressure is too high, the UF membrane will be damaged.
Is the tap water filter really useful? Strictly speaking, if it is harmful to people and uses pure water for a long time, some trace elements of the human body cannot be supplemented to people, which is harmful to people. as long as tap water is not consumed directly, it can meet the hygiene requirements, however, some experts are alarmist and it is more useful to take the opportunity to sell filters. It is mainly used to remove impurities such as sediment and large particles carried by tap water through pipeline transportation. At present, I personally feel that hanshill is currently a relatively good domestic filter, and their machines are imported from Germany, and the reputation in the front is very good. 1. now the water pollution is very serious. the tap water in many areas is clean when it leaves the factory. yes, but the possibility of secondary pollution during transportation is very high. 2. it is good to have sediment and rust. in some places, tap water will smell different or yellow, which is a si